SIMKO Recycling requires a minimum of 500 lbs of scrap iron before we pay for it. You can drop off less than 500 lbs for free however.
SIMKO NOW ACCEPTS CAR BODIES:
No need to drain fluids, remove gas tanks or tires. JUST DRIVE THEM IN and get Paid.
ALL MATERIAL IS SUBJECT TO INSPECTION AND GRADING.
P & S 3 Ft
Cut structural and plate scrap, 3 feet and under. Clean open hearth steel plates, structural shapes, crop ends, shearings. Dimensions not less than ¼ inch in thickness, not over 36 inches in length and 18 inches in width.
P & S 5 Ft
Cut structural and plate scrap, 5 feet and under. Clean open hearth steel plates, structural shapes, crop ends, shearings. Dimensions not less than ¼ inch thickness, not over 5 feet in length and 18 inches in width
#1 PREPARED IRON
No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap 1/4 inch and over in thickness. Individual pieces not over 36 inches x 18 inches (charging box size) prepared in a manner to insure compact charging.
#1 UNPREPARED IRON
No. 1 heavy melting steel. Wrought iron and/or steel scrap 1/4 inch and over in thickness.
#2 PREPARED IRON
No. 2 heavy melting steel.* Wrought iron and steel scrap, black and galvanized, maximum size 36 x 18 inches. May include all automobile scrap properly prepared.
#2 UNPREPARED IRON
Assorted iron & steel scrap up to any maximum size, must be free of white goods, such as washers, dryers, stoves, refrigerators, etc.
Clean cast iron scrap such as columns, pipes, plates, and castings of a miscellaneous nature, including automobile blocks and cast iron parts of agricultural and other machinery. Free from stove plate, burnt iron, brake shoes or foreign material.
Clean cast iron scrap in sizes not over 60 inches in length or 30 inches in width, suitable for charging into an open hearth furnace without further preparation.
HEAVY BREAKABLE CAST
Cast iron scrap over charging box size or weighing more than 500 pounds. May include cylinders and driving wheel centers. May include steel which does not exceed 10 percent of the casting by weight.
DIRTY MOTOR BLOCKS
Whole or part cast iron auto or truck engines. Transmissions may or may not be attached. Motor and Tranny pans MUST BE REMOVED. Fluids Must Be Completely Drained.
Sheet Iron (Sheet Tin) shall consist of miscellaneous sheet iron & sheet steel and may contain galvanized sheet, painted & coated materials, hoods, trunks, doors etc.
Clean steel or wrought iron turnings, free of iron borings, nonferrous metals in a free state, scale, or excessive oil. May not include badly rusted or corroded stock.